Page 2
Agrident GmbH. Agrident GmbH reserves the right to make changes to any and all parts of this documentation without obligation to notify any person or entity of such changes.
APR500 Barcode-Version Content Introduction ......................4 Using the Barcode-Scanner in Classic-Mode ............4 Barcode number as RFID replacement ............4 Assigning a Barcode to an RFID tag ............5 Using the Barcode Scanner in the Task-Mode ............ 6 ...
APR500 functions. Please see the other APR500 manuals for general information about the APR500. For the Barcode-Version of the APR500 the connector at the top of the reader is not available. Hence it is not possible to connect an external antenna or an RS232 cable. The only wired interface that can be used is USB via the contacts on the bottom of the reader.
In order to configure this function, the Hotkey-Mode needs to be changed first. As always ,this can be done for Hotkey In the main screen of the APR500 you should see “Assign ? Save” now for the configured Hotkey (here: Hotkey A).
After the Barcode has be read, the previous assignment will be overwritten with the new one. Using the Barcode Scanner in the Task-Mode The Task-Mode for the APR500 is another operating mode which is completely independent from the Classic-Mode and its data collection possibilities. It allows the collection of quite complex datasets.
The manufacturer accepts no liability for damage resulting from improper use or use not consistent with that described in these operating instructions. The APR500 Reader contains no parts that can be repaired by the user. For this reason the Reader Electronic may only be repaired by authorized customer service personnel.
International approvals CE marking Hereby, Agrident BV declares that this equipment, if used according to the instructions, is in compliance with the essential requirements and other relevant provisions of the RTTE Directive 1999/5/EC. For use in all countries of the EU.
Address: 9303 Grant Avenue, Manassas, VA 20110, USA Telephone: 001 703 659 9507 (Diane Smith) ICAR The APR500 has also passed the ICAR approval for synchronizing transceivers according to ISO11784/11785 and ISO24631-2 successfully. Trouble shooting For any problem please contact us: Agrident GmbH Steinklippenstr.
Need help?
Do you have a question about the APR500 and is the answer not in the manual?
Questions and answers