Sharp VC-MH705HM/LM Service Manual page 68

www.freeservicemanuals.info
FRONT PANEL PARTS (VC-MH705HM/LM)
F
E
D
C
B
A
1
PRECAUTION ON FRONT PANEL SET-UP
Cassette cover
open lever
500
500-10
500-6
2 3
Cassette housing
Cassette cover
open lever
Before attaching the front
panel in position, make
sure that the cassette cover
open lever is in its right
place (lower-most). If it is
out of position, push it down
with a finger.
Digitized in Heiloo the Netherlands
500-7
500-3
500-1
4 5
Front panel
Cassette cover
Cassette cover
open lever
About 45°
Keep the cassette cover Do not mount the front
about 45° open and make panel with the cassette
sure that the cassette cover cover tilted too open.
open lever is between the Otherwise the cassette
front panel and the cassette cover might wrongly run
cover. Now fix the front panel on the cassette housing.
in place.
97
VC-MH705HM/LM
6/17/2019
VC-MH815HM/LM,MH85HM
VC-MH715HM,MH835HM
500-12
500-11
501
502
6 7
Cassette cover
3
4
1
2
5
Removing the cassette compartment cover.
1 Open the cassette compartment cover
fully.
2 Remove the center positioner.
3 Slide the cover to the right.
4 Slightly bend the cover.
5 Draw out the left-side rod.
Not for sale!