Bestop 42502 Installation Instructions page 2

Pet Barrier – Installation Instructions
Parts List and Hardware Identifi cation
Left Middle Right Middle
Bracket, Qty - 1 Bracket, Qty - 1
Upper Connecting
Bracket, Qty - 2
Rectangular Base
Bracket, Qty - 2
Left Base Right Base
Bracket, Qty - 1 Bracket, Qty - 1
Rev. F 0114
Upper Partition,
Qty - 1
M6 x 20 Thumbscrew, Part
Number 495.61, Qty - 2
Lower Partition,
Qty - 1
M6 Spring
Washer,
Qty - 2
M6 x 35mm Button Head Screw, Qty - 4
M6 x 45mm Button Head Screw, Qty - 4
Soft Top Only
Upper Mounting
Bracket, Qty - 2
M6 x 15 Thumbscrew, Part
Number 495.60, Qty - 2
M6 Washer, M6 Lock Nut,
Qty - 20 Qty - 8
M6 x 25mm Button Head Screw, Qty - 6
M8 Washer,
M8 Lock Nut (Nyloc
Qty - 4
Nut), Qty - 2
M8 x 35mm Hex Bolt, Qty - 2
For easiest installation, remove the rear
seat prior to installing the Pet Barrier.
Install Rectangular Base
Brackets and Base Brackets
Use a 4mm allen wrench, two (2) M6 x 45mm Button
Head Screws, and two (2 ) M6 Washers to install
a Rectangular Base Bracket and the Right Base
Bracket on the passenger side rear outboard seat
mount. Repeat on the other side of the vehicle.
Rectangular Base
Bracket
M6 Washers
Right Base
Bracket
M6 x 45mm
Button Head
Screws
42502 pg. 2