Advertisement
Quick Links
Content
Content
Parts List
Operation
Technical Data
Maintenance
Safety Instructions
Storage
Getting Started
Parts List
Technical Data
1.
Handle
Rated Voltage: 120V~ 60Hz
2.
Connection knob
3.
Operation panel
Ampage: 13.5 A
Plowing Capacity: Max. 720M2/HR
5.
Discharge Chute
Idling/Rotation Speed:1700rpm
6.
Auger
Plow depth and width: Approx. 11.8" and 18"
7.
Side cover
Max Spraying Distance: 1.5-3 feet
8.
Housing
Weight: 16.20kg
9.
Below handle
10. Switch box
11. Handle sponge
11
10
9
8
7
1
2
3
4
5
6
2
Advertisement
Related Manuals for All-Power APSB1810E
Summary of Contents for All-Power APSB1810E
- Page 1 Content Content Parts List Operation Technical Data Maintenance Safety Instructions Storage Getting Started Parts List Technical Data Handle Rated Voltage: 120V~ 60Hz Connection knob Operation panel Ampage: 13.5 A Plowing Capacity: Max. 720M2/HR Discharge Chute Idling/Rotation Speed:1700rpm Auger Plow depth and width: Approx. 11.8” and 18” Side cover Max Spraying Distance: 1.5-3 feet Housing...
- Page 2 IMPORTANT! starting the power tool accidentally. Safety Instructions GENERAL SAFETY INSTRUCTIONS the power tool or these instructions to operate the power tool. Power tools are dangerous in Warning: Read all instructions. Failure to follow all instructions listed below may result in electric the hands of untrained users.
- Page 3 Safety and Instruction Decals the socket and disconnect the power immediately. Repair the cable for replace it if necessary. Safety decals and instructions are easily visible to the operator and are located near When adding the lubricant or replacing any parts, you must strictly observe the instructions areas of potential danger.
- Page 4 Discharge Chute Assembly 1. Locate the discharge chute from the carton See Pic a WARNING 2. Put the chute on the main cover, aligning the teeth on the discharge chute with that on the main cover .See Pic b 3. Loosen the bolt on the chute and align the hole on the chute with that on the main cover, is damaged, do not use the snow thrower.
- Page 5 not attempt to operate the snowthrower with frozen parts. If the parts freeze while the frozen parts. Free all parts before restarting or operating the snowthrower. Never force controls that have frozen. 10. Working on pebbles, gravel or unpaved surfaces—To avoid throwing loose surface material along with the snow, push down on the handle to raise the scraper at the base of the unit above the pebbles or gravel.
- Page 6 Cover loosely with a tarp for added protection. All-Power warrants to the original purchaser who uses the product in a consumer application (personal, residential or household usage) that all products covered under this warranty are free from defects in material and workmanship for two years from the date of purchase.
- Page 7 Expendable parts or accessories supplied with the product which are expected to become inoperative or unusable after a reasonable period of use. Merchandise sold by All-Power which has been manufactured by and identified as the product of another company, such as gasoline engines. The product manufacturer's warranty, if any, will apply.
-
Page 8: Parts List
Parts List Parts List (cont’d) APA Parts No. Pos No. Manufacturer Part No. Description Qty. APA Parts No. Pos No. Manufacturer Part No. Description Qty. SB1810E-01-YAT 8231-660101 Scrape snow blade SB1810E-43-YAT 8SNAB30-08B Flange self tapping screw 3*8 SB1810E-02-YAT 8063-660104 SB1810E-44-YAT 8BC-220807-SS01 608 2RS Bearing SB1810E-03-YAT... - Page 9 Parts List (cont’d) APA Parts No. Pos No. Manufacturer Part No. Description Qty. SB1810E-85-YAT 8141-660102 SB1810E-86-YAT 8312-660101 Adjust divider rod SB1810E-87-YAT 8086-670101 SB1810E-88-YAT 8141-660103 Right adjust head SB1810E-89-YAT 8342-670101 SB1810E-90-YAT 8086-670102 Pin shaft 2 SB1810E-91-YAT 8202-660104 Washer SB1810E-92-YAT 8NH-05D Hex nylon locking nut M5 SB1810E-93-YAT 8087-660103 Up handle...
Need help?
Do you have a question about the APSB1810E and is the answer not in the manual?
Questions and answers