Huawei AR100 Series Quick Start Manual page 9

8 Logging In to the Router for the First Time
8.1 Using the default web login settings
Before You Start
If the web page is displayed abnormally, the browser version may be too low. Upgrade the browser and log in
to the web platform using Mozilla Firefox 12.0 or later, Google Chrome 23 or later, or Internet Explorer 8.0 or
later.
The login page varies according to version.
You can also scan the QR code on the right to watch the video introducing the procedure for logging in to
routers in web mode.
Login Procedure
Step 1 Turn on the power switch on the external power supply and log in to the router after the SYS indicator
blinks once every 2 seconds (indicating that the router is running properly).
Step 2 Use a network cable to connect a PC to the management interface marked with the Management
silkscreen on the router.
NOTE
If the Management silkscreen is not found on the panel of the router, find the corresponding
management interface based on the router model.
AR150 series: FE3 (Ethernet0/0/3).
AR160 series: GE0 (GigabitEthernet0/0/0).
AR200 series: FE6 (Ethernet0/0/6).
GE0
2 1
EN EN
CON/AUX
Step 3 Assign the PC with an IP address on the same network segment as the router IP address. The available IP
addresses are in the range from 192.168.1.2 to 192.168.1.254, and the subnet mask is 255.255.255.0.
GE0 GE1 FE0 FE1 FE2 FE3 FE4 FE5 FE6
RST
ACT
FE7 OFF
~100-240V;50/60Hz;2A
Network cable
8
SYS
SYS WAN
RST
Network port