Huawei AR100 Series Quick Start Manual page 10

Step 4 Start the browser, enter the URL https://192.168.1.1 in the address box, and press Enter to access the login
page.
Step 5 Enter the user name and password, and click Login to access the web page.
NOTE
For V300R019C00 and later versions, t
admin@huawei.com.
For the other versions, t
On the web page, you can configure the router. To switch between the Classics web system and the
EasyOperation web system, click Switch Version in the upper right corner. For more information, see the
Web-based Configuration of the product.
If you fail to log in to the web platform, the current software version of the router does not support login using
the default web login settings. In this case, try the method in 8.2 Using the configured web login settings.
8.2 Using the configured web login settings
Before You Start
Install third-party terminal simulation software on the PC by referring to user manual or online help.
The password entered in interactive mode is not displayed on the screen.
Login Procedure
Step 1 Use a console cable to connect a PC to the Console interface of the router.
Step 2 Start the terminal simulation software, create a connection, configure the connected port, and set
communication parameters as follows.
Transmission rate: 9600
Data bit (B): 8
Parity bit: None
Stop bit (S): 1
Flow control mode: None
Step 3 Press Enter until the following information is displayed. (The following information is only for reference)
In V200R005C30 or a later version, the system will prompt you to enter the default password.
Login authentication
Username:admin
Password:
Info:The entered password is the same as the default. You are advised to
change it to ensure security.
NOTE
For V300R019C00 and later versions, t
admin@huawei.com.
For the other versions, t
he default user name is admin and the default password is
he default user name is admin and the default password is Admin@huawei.
he default user name is admin and the default password is
he default user name is admin and the default password is Admin@huawei.
9