Table of Contents
Advertisement
Scenario 2: Removing a Guide Rail
Installation Procedure
Step 1
Use a Phillips screwdriver to loosen the captive screws on the filler panels on the two SIC
slots counterclockwise.
Step 2
Pull the filler panel out by the captive screw. Keep the filler panel for future use.
Step 3
Use the Phillips screwdriver to loosen the screw on the guide rail.
Step 4
Remove the guide rail in the middle of the chassis.
Step 5
Turn the eject lever of the card 45 degrees outward. Push the card into the chassis with your thumbs.
Step 6
Rotate the ejector lever inward to lock the card after the card is completely in the chassis.
Step 7
Use the Phillips screwdriver to fasten the captive screws clockwise.
2
1
3
4
6
5
6
7
Hide quick links:
Advertisement
Table of Contents
