Letscom ID132Color HR User Manual page 19

Note:
For iOS smartphones, if you failed to find "ID132Color HR"
in the APP, take the following steps:
D *R WR \RXU VPDUWSKRQH 6HWWLQJV
"MY DEVICES", find ",'&RORU +5  WDS RQ
"Forget This Device" and turn off Bluetooth.
b) Reboot smartphone and open the "VeryFitPro" APP.
When asked whether to turn on the Bluetooth switch,
click OK to search and bind your device.
Failed to charge the device
Make sure the direction of the device's USB plug is correct
when plugging into the USB port for charging. For correct
charging, the device's red indicator turns on and will be off
when the device has been fully charged. Please remove the
device host from the power supply once fully charged.
Prolonged charging may shorten the battery's life.
Failed to receive SMS/Calls notifications
Calls/SMS notification function works when the
deviceconnects to your smartphone via APP. Please kindly
refer to the following tips:
1) Go to your smartphone system Settings, find "VeryFitPro"
APP and enable the Location and all Notifications.
(Specific setting methods may vary according to different
smartphones.
2) Turn Bluetooth on and go to the "VeryFitPro" APP to bind
the device.
 6ZLWFK &DOO616 $OHUW IXQFWLRQ RQ DQG FOLFN ¥ WR VDYH
your settings.
Failed to count steps accurately
Regarding step counting, this fitness tracker has a built-in 3D
sensor. It registers your steps when you swing your arm.
Sometimes the data on the device may display a little
delayed. And it will reset itself if you walk less than 40 steps
continuously. To test the accuracy of the pedometer, please
walk casually and consistently up to 100 steps or more.
%OXHWRRWK  8QGHU
17