Related Manuals for Letscom ID131Color HR
Summary of Contents for Letscom ID131Color HR
- Page 1 Fitness Tracker User Manual ID131Color HR Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device.
-
Page 2: Safety And Warranty
SAFETY AND WARRANTY Important Safety Instructions The device contains electrical equipment that may cause injury if not used properly. For example, prolonged contact may contribute to skin allergies for some users. To reduce irritation, please read the safety guidelines on the following pages to ensure proper use and care. - Page 3 For light colored arm bands, minimize direct contact with dark-colored clothing, as color transfer could occur. Dispose of this device, the device’s battery and its package in accordance with local regulations. Don’t not check any notifications, GPS, or any information on your device’s display while driving or in other situations where distractions could cause injury or hazardous.
-
Page 4: Maintenance
provides the best estimate of a user's heart rate, there are inherent limitations with the technology that may cause some of the heart rate readings to be inaccurate under certain circumstances, including the user's physical characteristics, fit of the device, and type and intensity of activity. movement and other metrics. -
Page 5: Warranty
them back on your wrist. Warranty detail and craftsmanship. However, sometimes there are occurrences of defect. devices as we continue to make amazing products. Please contact us if you have any questions about our devices. Package List Fitness tracker (tracker body and bands) Assemble/Dissemble &... - Page 6 Fitness Tracker Activation Please charge your tracker for at least 10 minutes to have it activated before initial use. Gently pull the bands off Insert the built-in USB plug the tracker body following with metal pins into a USB the direction of the arrow. charger for charging.
-
Page 7: App Installation
Assemble: Push the bands in the tracker body. Wear: to carpal, the same way as wearing a watch. App Installation Use the tracker with our customized app "VeryFitPlus". You can download "VeryFitPlus" from Apple Store/Google Play or scan the QR codes below to download. For Android For IOS... - Page 8 Notes: tablets or PCs. higher systems, Bluetooth version should be 4.0 or higher. App Interfaces Main Page Details...
- Page 9 Achievements Sports...
- Page 10 Pair the Device with Your Phone 1. Enable the Bluetooth of your phone. 2. Open "VeryFitPlus" app on your smartphone and go to "Me" page, tap the question mark on top of the page and tap "Hand Ring Products", then your smartphone starts searching devices.
- Page 11 3. Choose "ID131Color HR" in the list of found devices, tap "ID131Color HR" to pair it with your smartphone. (If your phone failed to find ID131Color HR, please tap the touch key to wake the tracker, and search the device on your phone one more time.)
-
Page 12: Know Your Device
set the settings back to default and all data on the tracker will be cleared. If the tracker is unbound under disconnected state, the app will set the settings back to default, but the data on the tracker will not be cleared. Know Your Device 1. - Page 13 3. Interfaces Tap the touch key to look through different interfaces: Main Screen Step Mode Heart Rate Mode Alarm Mode※1 Bike Run Mode Bike Mode ※2 Notes: "Alarm Mode" is displayed on the tracker screen only when alarm alert(s) is/are added and turned on in the app HR"...
-
Page 14: Waking A Dimmed Screen
4. Waking a Dimmed Screen display is off. To wake it up: will display time and steps. Main Screen display the Main Screen. Note: The screen brightness can be adjusted from Level 1 to Level 5 brightest. Functions 1. Step Mode Hold the touch key for 2s to enter Step sub-mode and view detailed step data. -
Page 15: Heart Rate Mode
2. Heart Rate Mode After entering the heart rate interface for 1s, the tracker starts monitoring the heart rate automatically. Before the correct data is detected, the tracker shows " "; after the correct data is detected, it shows specific data. Monitoring Heart rate displayed Tap the touch key to enter the next mode: Alarm Mode. -
Page 16: Walk Mode
4. Walk Mode 1) Hold the touch key for 2s to start the walk mode. During exercise, tap the touch key to flip through exercise data. Steps Kcal Miles Pace AVG Pace Time 2) Hold the touch key for 2s to quit the walk mode. The following data is displayed after the exercise is ended: Steps/MI Min/Kcal... -
Page 17: Run Mode
Tap the touch key to flip through exercise data. 3) Tap the touch key to enter the next mode: Run Mode. Note: Data of exercises less than 1 minute will not be saved. 5. Run Mode 1) Hold the touch key for 2s to start the run mode. -
Page 18: Bike Mode
2) Hold the touch key for 2s to quit the run mode. The following data is displayed after the exercise is ended: Steps/MI Min/Kcal AVG Pace/BPM Tap the touch key to flip through exercise data. 3) Tap the touch key to enter the next mode: Bike Mode. 6. - Page 19 2) Hold the touch key for 2s to quit the bike mode. The following data is displayed after the exercise is ended: Min/Kcal Tap the touch key to flip through exercise data. 3) Tap the touch key to go to the main screen. Notes: In the Sports page in the app, choose a sport and tap "GO"...
- Page 20 Choose a sport Pause the sport GPS map Resume or stop the sport...
- Page 21 6.1 Abnormal Situations During Exercise 1) Inactive Exit Prompt a. The tracker will automatically exit the sport mode if no action is taken in 15 minutes. b. The tracker will be forced to exit the sport mode if you don't tap on the waiting prompt within 15 seconds.
-
Page 22: More Functions
6.2 Abnormal Operation Situation During Exercise disconnected, the screen will display a prompt of waiting. Tap the touch key to exit the interface of waiting prompt. 7. More Functions 7.1 Call Alert Father the tracker vibrates to remind you and the screen displays the caller ID. - Page 23 7.2 Notifications Alert Messenger, LinkedIn, Email and more) come in, the tracker vibrates to remind you and the screen displays the message content. Notes: mode "), messages will not be notified on the tracker during the set non-disturb period. 7.3 Sedentary Alert The tracker vibrates to remind you to move when you are sitting too much (Go to switch on the Sedentary alert function and set...
- Page 24 7.5 Target Completion Reminder vibrates to remind you. 7.6 Device Error Notification displayed. Status code: -01 indicates the acceleration sensor is abnormal; -02 indicates the heart rate sensor is abnormal; -03 indicates the touch key IC is abnormal; -04 indicates the flash memory is abnormal...
- Page 25 Basic Specifications Model No.: ID131Color HR Battery Type: Lithium polymer battery Battery Capacity: 90mAh Sync: Bluetooth 4.0 ℃~ 40℃ Declaration of toxic and hazardous substances in electronic information products The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive...
- Page 26 FCC ID:2AR5EID131COLORHR Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the ID131Color HR and is the answer not in the manual?
Questions and answers