Advertisement
Relay Module Installation on ANN-MBRLY Mounting Bracket
1.
Hold the Relay Module with the relays positioned to the left and install the Relay Module on the ANN-MBRLY
mounting bracket by positioning the four module mounting holes over the four standoffs on the mounting bracket.
2.
Secure the Relay Module to the ANN-MBRLY mounting bracket with the four supplied screws.
3.
Set the SW1 DIP switches and connect the wiring as described in the previous sections.
4
mounting hole
mounting hole
ROME Series
ROME Series Installation Document — P/N 53530:B 9/14/2009
mounting hole
Optional
Relay
Module
mounting hole
Advertisement
