Advertisement
7.
Install the supplied module insulating pad on the MULTIMOD-BRKT bracket by aligning the four outer holes with
the four standoffs on the bracket and pressing the pad onto the standoffs and flat against the bracket as illustrated
below.
8.
Install the addressable Multi-Module on the MULTIMOD-BRKT mounting bracket by positioning the four module
mounting holes over the four standoffs on the mounting bracket.
9.
Secure the addressable Multi-Module to the MULTIMOD-BRKT bracket with the four supplied mounting screws as
illustrated below.
6
standoff
standoff
mounting screw
mounting screw
ROME Series Installation Document — P/N 53530:B 9/14/2009
standoff
standoff
mounting screw
mounting screw
Advertisement
