Setting The Area Code; Registering The Handset - Sylvania STC984 Owner's Manual

Caller ID System Operation
K. Setting the Area Code
1. Press the Voice Mail/Func button to enter the
menu.
2. Press the *
programming option.
3. Press the Flash/Edit
flashing.
4. Press the Telephone Keypad 1 to 0 buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the Re/Pa/Save
button to save the setting. A long "beep" will sound to confirm the setting has
been saved.
6. Press the Voice Mail/Func button to return to
NOTE: Do not use the AREA CODE programming if you are required to dial
10 digits (XXX-XXX-XXXX) to dial a local number.
L. Registering the Handset
1. Press the Voice Mail/Func button to enter the menu.
2. Press the #/Option button to go to the REGISTER
programming option.
3. Press the Flash/Edit button. The LCD screen will
display "Put down".
4. Put the Handset on the Base Unit charge cradle
within 6 seconds. A confirmation "beep" tone will
be heard.
5. The Base Unit will automatically assign the ID
number of the newly registered Handset. The
Handset ID number will be displayed on the LCD
screen.
6. To register another Handset, follow steps 1 to 4.
button to go to the AREA CODE
button to change the setting. "000" will begin
26
mode.
standby