Setting The Pbx Number; Changing The Flash Time - Sylvania STC984 Owner's Manual

Caller ID System Operation
3. Press the Flash/Edit button to change the setting. "4" will begin flashing.
4. Press the SCROLL UP
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save
the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the Voice Mail/Func button to return to
standby mode.
F. Setting the PBX Number
1. Press the Voice Mail/Func button to enter the menu.
2. Press the 6
programming option.
3. Press the Flash/Edit button to change the setting. "OFF" will begin flashing.
4. Press the SCROLL UP
PBX system. When not connected to a PBX, the phone will only function normally
when set to "OFF."
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to
save the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the Voice Mail/Func button to return to
standby mode.
G. Changing the Flash Time
1. Press the Voice Mail/Func button to enter the menu.
2. Press the 7
programming option.
3. Press the Flash/Edit button to change the setting. "600" will begin flashing.
4. Press the SCROLL UP
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to
save the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the Voice Mail/Func button to return to
standby mode.
NOTE: The standard and default flash time setting is 600 msec. This is the setting you
should use to access standard telephone services such as call waiting. This setting
is adjustable to allow for PBX and other special uses.
or DOWN button to toggle from 1 to 8 levels of contrast.
button to go to the PBX NUMBER
or DOWN button to customize the digit to match your
button to go to the FLASH TIME
or DOWN button to select the desired FLASH TIME.
24