Sylvania NB500SL9 Owner's Manual page 40

How to navigate through "HDMI Multi(LPCM)".
1
Use [K / L] to select your desired menu item then press [ENTER].
2
Use [K / L] to select your setting items.
• Press [RETURN
3
Use [s / B] to select desired options. (Except for "Test Tone", "Default" and setting
options in "Speaker Size" setting.)
For setting options in "Speaker Size" setting:
Press [ENTER] to select desired options.
For "Test Tone":
Use [s / B] to select "Off", "Manual" or "Auto", then press [ENTER].
• The test tone will be output. If you select "Manual", use [K / L] to select desired speaker, then use [s / B] to
adjust the volume. If you select "Auto", use [s / B] to adjust the volume of the speaker that outputs the test tone.
• If you want to stop the test tone, press [RETURN
For "Default":
Press [ENTER] to reset to the default.
4
Press [SETUP] to exit.
Menu
Speaker Size
Selects the desired
speaker to set. Then
change the setting
appropriately by
referring to the
descriptions.
Channel Level
Tests or sets the volume
for each speaker.
38
FUNCTION SETUP
] to go back to the previous screen.
Setting items
Front
Center
Subwoofer
Surround
Surround Back
Default
Test Tone:
"Test Tone" is the
test tone which
can be output
from the speakers
so that you can
adjust the volume
for each speaker.
Front Lch
Center
Subwoofer
Front Rch
Surround Rch
Surround Back
Rch
Surround Back
Lch
Surround Lch
Default
].
Options
Large* Large:
For the large speakers with strong low
Small
frequency reproduction capabilities.
Large*
Small:
Small
For the small speakers which do not
provide strong bass sound.
On
You cannot change the setting of
Large*
"Subwoofer". If connected device is not
Small
compatible with subwoofer, "Subwoofer"
will be displayed in gray.
Large*
Small
Select "Default", then press [ENTER] to
reset "Speaker Size" setting to the default.
Off* Select "Off" to deactivate "Test Tone".
Select "Manual", then press [ENTER] to
Manual
manually set the volume for the desired
Auto
speaker.
Select "Auto", then press [ENTER] to
automatically output the test tone from
each speakers.
0 dB to -12 dB If you have selected "Manual" in "Test
(0 dB*) Tone", select the desired speaker to set
and adjust the volume for the selected
0 dB to -12 dB
speaker.
(0 dB*)
If you select "Auto" in "Test Tone", test
0 dB to -12 dB
tone will automatically be output in order.
(0 dB*)
Adjust the volume of the speaker that
0 dB to -12 dB
outputs the test tone.
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
Select "Default", then press [ENTER] to
reset "Channel Level" setting to the
default.
Descriptions
EN