Connections; Connection To The Tv - Sylvania NB500SL9 Owner's Manual

Connection to the TV

• Make one of the following connections, depending on the capabilities of your existing device.
AUDIO CONNECTION
TV
standard audio
audio cable
this unit
AUDIO OUT
1
* This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures
than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer
to "HDMI Video Resolution" or "Component Output" setting on page 34 to set the video resolution.
2
* Analog audio connection is not required for this connection.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
• HDMI cable (High Speed HDMI Cable) x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be
distorted due to the copy-protection system.
• If the picture is not output properly to the TV because of "HDMI Video Resolution" or "Component Output" setting,
press and hold [ B PLAY] on the front panel for more than 5 seconds. "HDMI Video Resolution" and "Component
Output" setting will be reset to the default automatically. You cannot change the video resolution during Blu-ray
Disc playback. To change the resolution, stop playback.
• A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) jack allows
digital transfer of both digital video signals and multi-channel audio signals.
12

CONNECTIONS

Method 1
standard picture
AUDIO IN
VIDEO
R L
IN
RCA
video
cable
RCA
and
VIDEO
OUT
VIDEO OUT
VIDEO CONNECTION
1
Method 2 *
better picture best picture
COMPONENT
VIDEO IN
Y
(Green)
P /C
B B
(Blue)
P /C
R R
(Red)
HDMI-DVI
RCA
cable
component
or or
video cable
(Green) (Red)
COMPONENT
VIDEO OUT
Y P /C
R R
(Blue)
P /C
B B
COMPONENT
VIDEO OUT
AUDIO / VIDEO
CONNECTION
1
Method 3 *
Method 4
best audio / picture
DVI IN
HDMI
cable
or
HDMI OUT
1, 2
*
HDMI IN
EN