Accessing Pylon On Your Pocket Pc Os Device; Syncing Your Windows Mobile 5 Device; Syncing Other Pocket Pc Os Devices Not Running Windows Mobile - Sybase Desktop User Manual

Chapter 6

Accessing Pylon on your Pocket PC OS device

Note
Tip
Note
98 / iAnywhere Solutions, Inc.

Syncing your Windows Mobile 5 device

If you have previously been using Pylon on a Pocket PC OS device, the
Windows Mobile 5 procedure for syncing is entirely different. You must
now use the Pylon icon in the system tray instead of ActiveSync.
To access Pylon on your Windows Mobile 5 device by syncing manually:
1. On your desktop computer, right-click the Pylon icon in the system
tray — lower right corner of icons shown below:
A shortcut menu is displayed.
2. If Enable Continuous Sync is selected, click Disable Continuous
Sync, then right-click the Pylon icon again to redisplay the shortcut
menu.
3. In the shortcut menu, click Synchronize.
4. If prompted, enter your Lotus Notes password to complete the sync.
You can prevent the password prompt dialog box from appearing
during future syncs by changing a setting in Lotus Notes. For
instructions on how to do this, see "Every time you sync, you are
prompted to enter your Lotus Notes user password." (page 187).
When ActiveSync has completed the sync, you will see confirmation that
Pylon successfully synced.
The instructions above are for initiating a sync manually. If you would
prefer to have your device sync automatically every five minutes, right-
click the Pylon icon in the system tray and click Enable Continuous
Sync. If you want to return to initiating syncs manually, right-click the
Pylon icon in the system tray and click Disable Continuous Sync.
Syncing other Pocket PC OS devices not running Windows
Mobile 5
To access Pylon on your Pocket PC OS device that is not running
Windows Mobile 5:
1. On your desktop computer, open ActiveSync.
2. Click the Options button.
3. The Options dialog box appears.