Shortcuts Instructions; Turning Your Tv On Or Off; First Time Installation; Selecting The Input Source - Hisense 40E5100EE User Manual

You can use shortcuts on the remote control for fast operation. Refer to the " Quick Setup Guide" for more
information.
1.1

Turning your TV on or off

To turn your TV on or off:
1. Plug the AC power cord into a socket outlet of AC power supply.
2. When the TV is powered on, press the [
NOTES
When your TV is in standby mode, it is still consuming power. To completely disconnect power, please
remove the mains plug from the mains socket.
If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
1.2

First Time Installation

Connect an outdoor VHF/UHF antenna or cable to your TV Aerial socket.
Select Language
1. Press the [ / / < / > ] and [ OK ] button to select the language to be used for menus and message.
2. Press the [ / / < / > ] and [ OK ] button to select country.
Press the [ < / > ] and [ OK ] button to set retail mode is on or off.
Press [ OK ] button to completed first time installation and enter tuning setup menu.
1.3

Selecting the Input Source

Select the Input Source depending on the video device you have connected to your TV.
To select the input source:
1. Turn on your TV, then press the [ Source ] button on the remote, the list of Source appears.
2. Press the [ /
] button to select the input source.
3. Press the [ OK ] button to confirm your selection.

Shortcuts Instructions

] button on the remote control, to turn TV on or off.
1