Turning Your Tv On Or Off; Instructions; Selecting The Input Source; Selecting The Aspect Ratio - Hisense 40K220PW User Manual

You can use shortcuts on the remote control for fast operation. Refer to the " Quick Setup Guide " for more
information.
1.1

Turning your TV on or off

To turn your TV on or off (standby mode):
1. Plug the AC power cord into a socket outlet of AC power supply.
2. Switch on the Power switch at the bottom of the TV to turn on/off your TV.
3. When the TV is powered on, press the [POWER] button on the remote control, it goes into standby mode.
Press the [POWER] button again to turn on your TV.
NOTES
When your TV is in standby mode, it is still consuming power. To completely disconnect power, please
remove the mains plug from the mains socket or switch off the Power switch.
If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
1.2

Selecting the Input Source

Select the Input Source depending on the video device you have connected to your TV.
To select the input source:
1. Turn on your TV, then press the [SOURCE] button on the remote, the list of Source appears.
2. Press the [▲/ ] buttons to select the input source.
3. Press the [OK] button to confirm your selection.
1.3

Selecting the aspect ratio

You can set various display modes which are shown as follows. Press the [ZOOM] button, you can achieve: 4:3
/16:9 / Zoom 1 / Zoom 2 / Smart Zoom / Auto / 1:1.
There are two kinds of input signal. One is 4:3, the other is 16:9. When you press the [ZOOM] button, he can
get different picture in different format. The recommended format for original 4:3 is 4:3 option or Auto and the
preferable format for original 16:9 signal is 16:9 option or Auto.
SIZE
This selection will allow you to
view a picture with an original
4:3 4:3 aspect ratio. Black bars
will appear on both the left
and right of the screen.
This selection will allow you to
adjust the picture horizontally,
16:9
in linear proportion, to fill the
entire screen.
English 6
Shortcuts Instructions
Input Signal 4:3 Input Signal 16:9
This selection will allow you to
adjust the picture horizontally,
in linear proportion. Black
bars will appear on both the
left and right of the screen.
This selection will allow you to
view a picture with an original
16:9 aspect ratio.