Better Homes and Gardens BH15-084-899-07 Assembly Manual page 17

Tools required: Phillips screwdriver, Power Drill, 3/8" Drill Bit and Rubber Mallet.
25. Ask for assistance to position the assembled unit at the desired location against a wall.
26. In case of uneven floors, the Floor Levelers are provided at the bottom of front legs for the necessary
adjustment. To adjust the unit, simply tilt the unit back and then adjust the floor levelers by hand to
correct tilting and/or level the doors.
27. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraints to the unit and the wall, as shown in the illustration.
NOTE: Young children can be seriously injured by tipping furniture. You must install the
Tipping Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents
or damage. The tipping restraints are intended only as a deterrent, they are not a substitute for
proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to add
the extra security of earthquake restraints, they must be purchased and installed separately.
Please call for replacement parts or assistance:
Whalen Furniture Manufacturing
Assembly Instructions
B
1-866-942-5362
Page 17
Stock # BH15-084-899-07
A
B/C
Factory No. 16086
C