Panasonic NR-F603GT-X6 Operating Instructions Manual page 21

The brightness of nanoe™ X lamp can be adjusted. (P. 9)
(You can adjust only when the temperature setting indicator of PRIME FRESH is not flashing.)
Setting Procedure
Press twice, then press
and hold for at least
10 seconds.
●
Above setting does not affect the effect of nanoe™ X.
●
To cancel, operate as above and set to " 3 " (Bright).
You can lock the control panel so that the settings are not changed with unintended operation or operation by
children.
Setting Procedure
Press and hold for at
least 3 seconds.
●
While lock function is activated and any key is pressed, "CL" appears in the notice indicator.
●
To unlock, do the same operation as above.
To adjust the brightness of nanoe™ X lamp
Setting
Brightness
(The setting is "3" at the time of purchase.)
To lock operation on the control panel
A beep sounds, "CL" appears in the notice indicator, and the
setting is completed.
(After a short time, "CL" disappears in the notice indicator.)
A beep sounds.
Press to select your desired brightness.
Approx. 10 seconds later, setting is completed.
1 2
OFF Dim
Appendix
3
Bright
21