Troubleshooting - AEG TB5050TW User Manual

18 www.aeg.com

12. TROUBLESHOOTING

Problem
You cannot activate the appliance.
The programme does not start.
The appliance door does not close.
The appliance stops during operation.
The cycle time is too long or unsatisfactory
drying result.
The display shows
The display shows Error code (e.g. E51).
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
1)
.
Possible solution
Make sure that the mains plug is connected
to the mains socket.
Check fuse in fuse box (domestic installa-
tion).
Press Start/Pause.
Make sure that the appliance door is closed.
Make sure that the installation of the filter is
correct.
Make sure that the laundry is not caught be-
tween the appliance door and the rubber
seal.
Make sure that the water container is emp-
ty. Press Start/Pause to start the programme
again.
Load is too small, increase the load or use
the Zeitprogramm (Time Drying) pro-
gramme.
Make sure that the weight of the laundry is
suitable for the duration of the programme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in
the washing machine again.
Ensure that the room temperature is higher
than +5°C and lower than +35°C. Optimal
room temperature is 19°C to 24°C.
Set the Zeitprogramm (Time Drying) or the
Extratrocken (Extra Dry) programme.
If you want to set a new programme, deacti-
vate and activate the appliance.
Make sure that the options are suitable for
the programme.
Deactivate and activate the appliance. Start
a new programme. If the problem occurs
again, contact the Service centre.
2)