Specifications - Swann Wireless Outdoor Cameras & Receiver Installation Manual

Contents
Introduction
Your Night Hawk Camera Pack comes with
Setting up your system
Camera Features
Receiver Features
Changing the channel on the Night Hawk Camera
Important Information about this product
Troubleshooting, Hints & Tips
Warranty Information
Technical Specifications
Help Desk / Support Details
Contents
The Swann Night Hawk Camera Pack incorporates the latest in advanced technology. We feel
confident that you will be pleased with the quality and features of this product.
The Swann Night Hawk Camera Pack allows you to transmit pictures and sound with ease. As the
radio waves it uses have a frequency of 2.4GHz, they can be received within a radius of up to
328ft/100 m in open line of sight. The Night Hawk Camera Pack comes with 2 cameras so that you
have the option of using different frequencies for different locations and conditions to ensure that
you have the best possible image quality for your situation.
Please note: The Swann Night Hawk broadcasts video in the public domain. The video signal
is not encrypted and could potentially be viewed by anyone with a similar 2.4GHz receiver
unit. Please keep this in mind when positioning and using any wireless camera equipment.
This Package Comes With ...
• 2 x Night Hawk Color Cameras with built in 2.4GHz Transmitter with Stand
• 1 x Night Hawk 4 channel 2.4GHz Receiver
• 2 x Mains Power Adaptor (8V for use with Night Hawk Camera)
• 1 x Mains Power Adaptor (12V for use with Night Hawk Receiver)
• 2 x Battery Snap Adaptor (For use with Night Hawk Camera, 9V batteries not included)
• Remote Control for receiver
• RCA A/V Cable
• This Instruction Sheet
If any of these items are missing, please contact your retailer.
INSTALLATION
FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
Including interference that may cause undesired operation
2
Technical Specifications
2 2
Night Hawk 2.4GHz Transmitter
2 2
Available Channels:
3 3
RF Output Power:
4 4
Operating Power:
4 4
Power Consumption:
5 5
Size:
5 5
Antenna:
6 6
7 7 Transmitting Range:
7 7
Weight:
Back Cover Back Cover
Operating Temperature:
Night Hawk 2.4GHz Receiver
Frequency:
Video input/output:
Audio input / output:
Antenna:
Audio Bandwidth:
Operating Power:
Power Consumption:
Size:
*The Night Hawk Camera Pack uses the following frequencies for the 4 channels:
Channel 1 ( 2414MHz), Channel 2 (2432MHz), Channel 3 (2450MHz) and Channel 4 (2468MHz)
Night Hawk CMOS Colour Camera
Sensor:
Horizontal Resolution:
Auto Electronic Exposure:
Minimum Illumination:
Signal to Noise Ratio:
Board Lens:
View Angle:
Size:
Video System:
Automatic Exposure / Gain / White balance/IR LED activation
4 Channels in 2.4 Ghz frequency band*
FCC, CE and C-tick compliant
8V DC
100mA
7 7
/ "x / "x1" (22x22x25mm)
8 8
Omni-directional
Up to 328ft ~ 100M line of sight
¾oz ~ 20 grams
32° - 122°F 0° - 50°C ( )
4 Channels in 2.4 Ghz frequency band*
1V p - p / 75 ohm
0.8V / 600 ohm
60 degree directional
50 - 17000 Hz
12V DC
180mA
5
6"x3½"x1 / "
8
150 x 88 x 40mm
1/3"(8.5mm) Colour CMOS
380 TV lines
1/60 - 1/15000 sec.
1.5 Lux @ f1.2 LEDs inactive
0 Lux @ f1.2 LEDs active
>48dB
7
/ " ~ 5.6mm
32
60 degrees
5 23
/ x / " ~16mm x 18mm, board lens
8 32
PAL 50Hz (Australia, UK/Europe),
NTSC 60Hz (USA and Canada)
.
7