Specifications - Swann Night Hawk Installation Manual

Index
Introduction
Your Night Hawk package comes with
Setting up your system
Camera Features
Receiver Features
Changing the channel on the Night Hawk Camera
Important Information about this product
Troubleshooting, Hints & Tips
Warranty Information
Technical Specifications
Help Desk / Support Details
Introduction
The Swann Night Hawk Camera Package incorporates the latest in advanced technology. We feel
confident that you will be pleased with the quality and features of this product.
The Swann Night Hawk Camera allows you to transmit pictures and sound with ease. As the radio
waves it uses have a frequency of 2.4GHz, they can be received within a radius of up to 328ft/100
m in open line of sight. The Night Hawk Camera Receiver works with other Swann cameras to
allow you to have the option of using different frequencies for different locations and conditions to
ensure that you have the best possible image quality for your situation.
Please note: The Swann Night Hawk Camera broadcasts video in the public domain. The
video signal is not encrypted and could potentially be viewed by anyone with a similar 2.4GHz
receiver unit. Please keep this in mind when positioning and using any wireless camera
equipment.
This Package Comes With ...
• 1 x Night Hawk Color Camera with built in 2.4GHz Transmitter with Stand
• 1 x Night Hawk 4 channel 2.4GHz Receiver
• 2 x Mains Power Adaptor (8V for use with Night Hawk Camera and Receiver)
• 1 x Battery Snap Adaptor (For use with Night Hawk Camera, 9V batteries not included)
• RCA A/V Cable
• This Instruction Sheet
If any of these items are missing, please contact your retailer.
FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
Including interference that may cause undesired operation.
2
2
2
3
4
4
5
5
6
7
7
Back Cover
Technical Specifications
Night Hawk 2.4GHz Transmitter
Available Channels: 4 Channels in 2.4Ghz frequency band*
RF Output Power: FCC, CE and C-tick compliant
Operating Power: 8V DC
Power Consumption: 100mA
7 7
Size: / "x / "x1" (22x22x25mm)
8 8
Antenna: Omni-directional
Transmitting Range: Up to 328ft ~ 100M line of sight
Weight: ¾oz ~ 20 grams
Operating Temperature: 0° - 50°C (32° - 122°F)
Night Hawk 2.4GHz Receiver
Frequency: 4 Channels in 2.4 Ghz frequency band*
Video input/output: 1V p - p / 75 ohm
Audio input / output: 0.8V / 600 ohm
Antenna: 60 degree directional
Audio Bandwidth: 50 - 17000 Hz
Operating Power: 8V-12V DC
Power Consumption: 180mA
5
Size: 6"x3½"x1 / " 150 x 88 x 40mm (
8
*The Night Hawk Camera uses the following frequencies for the 4 channels:
Channel ( 2414MHz), Channel (2432MHz), Channel (2450MHz) and Channel (2468MHz). 1 2
Night Hawk CMOS Colour Camera
Sensor: 1/3"(8.5mm) Colour CMOS
Horizontal Resolution: 380 TV lines
Auto Electronic Exposure: 1/60 - 1/15000 sec.
Minimum Illumination: 1.5 Lux @ f1.2 LEDs inactive
0 Lux @ f1.2 LEDs active
Signal to Noise Ratio: >48dB
7
Board Lens: / " ~ 5.6mm
32
View Angle: 60 degrees
5 23
Size: / x / " ~16mm x 18mm, board lens
8 32
Video System: PAL 50Hz (Australia, UK/Europe),
NTSC 60Hz (USA and Canada)
Automatic Exposure / Gain / White balance/IR LED activation
)
3 4
7