When using electrical appliances, basic safety precautions should always be
followed, including the following:
I Read all instructions.
I To protect against risk of electric shock, do not immerse cord, plug,
or any non-removable parts in water or other liquid. To clean, wipe
exterior with a damp cloth.
I Close supervision is necessary when any appliance is used by or
I Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning. To unplug, grasp plug and pull from
electrical outlet. Never pull cord.
I Avoid contacting moving parts.
I Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions, has been dropped, or damaged in any
manner. Return the appliance to the nearest authorized service
center for examination, repair, or adjustment.
I The use of attachments not recommended by the appliance
manufacturer may cause fire, electric shock or injury.
I Do not use outdoors.
I Do not let cord hang over edge of table or counter or touch hot surfaces.
I The Blade is sharp. Handle carefully. Store out of reach of children.
I To avoid injury, never place Knife Blade on Base without first putting
Bowl properly in place. Make sure Motor and Knife Blade have
stopped completely before removing Lid.
I Be certain Lid is locked securely in place before operating appliance.
Do not attempt to defeat the Lid interlock mechanism.
I This appliance is intended for processing small quantities of food; it
is not intended to prepare large quantities of food at one time.
I Avoid running the motor continuously for periods over 1 minute.
I Do not operate the appliance when empty.
I Check Bowl for presence of foreign objects before operating.
I Do not operate in the presence of explosives and/or flammable fumes.
I This appliance is intended for household use only, not for commercial
or industrial use.
SAVE THESE INSTRUCTIONS
This appliance has a polarized plug—one blade is wider than the other. To
reduce the risk of electric shock, this plug will fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse it. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature by
modifying the plug in any way.