Megasat IP Server 3 Quick Manual page 29

4. Main menu
Note:
1. If the frontend is used by other client, server would show a warming message. Please
close that client and reboot server.
2. If LNB Configuration is set to One User per RF, please use frontend 1 to 4.
3. If the channel you want to play is not in pre-programmed database. Please input at
least below parameters manually:
- Reception Standard: DVB-S, DVB-S2
- DiSEqC Position: 1 to 4. If you don't use DiSEqC, please enter 1.
- Frequency (MHz)
- Polarization: horizontal, vertical
- Symbol Rate (kBaud/s)
- Modulation Type: QPSK, 8PSK
- List of PIDs: PAT, PMT, video and audio PIDs
- Service Name
4. If you have no idea about above parameters, please tune to the channel with a SAT>IP
supported client. Frontend Information menu will show you correct values.
ENGLISH
11