Elk Products Magic Module Series Instructions

Magic Module
ELK-MM220 Module, 2 Input, 2 Output, Programmable
ELK-MM220S Module, Savoy Version of the ELK-MM220
ELK-MM443 Module, 4 Input, 4 Output, Programmable
ELK-MM443S Module, Savoy Version of the ELK-MM443
ELK-MV120 Voice Module, 32 Recordable Channels
ELK-MK400S Starter Kit, Includes ELK-MM443S & ELK-MK485
ELK-MK485 Programmers Kit,ELK-MB485, Cables, Software
™
ELK-MK420 iButton Access Kit w/ MM443, MA100, MA101
™
ELK-MA100 iButton "Touchkey" Reader & Interface Pack
ELK-MA101 iButton "Touchkeys", 10 pcs w/keyring holders
ELK-MA290 Proximity / Wiegand Data Interface to MM443
ELK-MB485 Data Bus Interface, RS232-RS485 PC Interface
ELK-MC100 Clock / Calendar Module for ELK-MM443
ELK-MT100 Temperature Sensor Module for ELK-MM443
®
ELK-MK410 X-10 Transceiver Kit, Programmed ELK-MM443
Notice: It is recommended that the entire system be completely tested on a
regular basis. However, despite frequent testing, and due to, but not limited to,
criminal tampering or electrical disruption, it is possible for this product to fail to
perform as expected.
Any system of any type may be compromised deliberately or may fail to operate
as expected for a variety of reasons.

LIFETIME LIMITED WARRANTY

Elk Products, Inc. ("Manufacturer") warrants to the original purchaser (the "Customer")
that the products it manufactures ("Product") shall be free from defects in material and
workmanship at time of shipment. Manufacturer's obligations under this Limited
Warranty shall be limited to repairing or replacing, at its option, free of charge, any
product returned to Manufacturer freight prepaid. Manufacturer shall have no obligation
under this Limited Warranty or otherwise if (1) the Product has been damaged by
negligence, accident, mishandling, lightning or flood, or other Acts of God, (2) the
Product has not been operated in accordance with its operating instructions, (3) the
Product has been altered or repaired by anyone outside Manufacturer's authorized
facilities (4) adaptations or accessories have been made or attached to the Product
which, in Manufacturer's sole determination, have adversely affected its performance,
safety or reliability. Products such as batteries and fused transformers have their own
warranties, and are not included in this Limited Warranty.
If a Product should malfunction or fail, contact Manufacturer or one of its authorized
distributors for a Return Authorization (RA) number. Returned Products must include
a complete description of the problem, along with the RA number clearly marked on
outside of the package. Manufacturer will not be responsible for any unnecessary
items included with any returned Product.
THIS WARRANTY IS THE EXCLUSIVE WARRANTY FOR ANY PRODUCT. MANU-
FACTURER SPECIFICALLY DISCLAIMS ANY AND ALL OTHER WARRANTIES OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE OR OF MERCHANTABILITY. MANUFACTURER
SHALL NOT BE LIABLE IN TORT, INCLUDING NEGLIGENCE OR STRICT LIABILITY,
AND SHALL HAVE NO LIABILITY AT ALL FOR INJURY TO PERSONS OR PROP-
ERTY. MANUFACTURER'S LIABILITY FOR FAILURE TO FULFILL ITS OBLIGATION
UNDER THIS LIMITED WARRANTY OR ANY OTHER LIABILITY IN CONNECTION
WITH A PRODUCT SHALL BE LIMITED TO THE AMOUNT OF THE PURCHASE PRICE
RECEIVED BY MANUFACTURER FOR THE PRODUCT. THE REMEDIES STATED IN
THIS LIMITED WARRANTY ARE THE CUSTOMER'S EXCLUSIVE REMEDIES
AGAINST MANUFACTURER REGARDING ANY PRODUCT. UNDER NO CIRCUM-
STANCES SHALL MANUFACTURER BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS AND REV-
ENUES, INCONVENIENCE OR INTERRUPTIONS IN OPERATIONS, OR ANY OTHER
COMMERCIAL OR ECONOMIC LOSSES OF ANY KIND. THESE LIMITATIONS AND
DISCLAIMERS ARE NOT MADE BY MANUFACTURER WHERE PROHIBITED BY
LAW. SOME STATES PROHIBIT LIMITATIONS OF WARRANTIES AND THE CUS-
TOMER MAY HAVE ADDITIONAL RIGHTS IN THOSE STATES.
This device complies with Part 15 of the FCC rules.
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with instructions,
may cause harmful interference to radio communications.
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna. 2) Increase the separation between
the equipment and receiver. 3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. 4) Consult the dealer or an
experienced radio/TV technician for help.
For more information contact your local Distributor or:
ELK PRODUCTS,INC (828)397-4200 FAX (828)397-4415
http://www.elkproducts.com Email:info@elkproducts.com
PRINTED IN USA
™ Series
Operation is subject to the
However, there is no
Magic Module Series
Two Input, Two Output
Programmable Module
ELK-MM220
4K Programmable Memory
APPLICATION:
The ELK-MM220 is an economical stand alone
field programmable controller. It can be pro-
grammed and used in a vast array of applications.
It features two digital inputs, two form C relay
outputs.
Magic Module Series
ELK-MM220
Two Input, Two Output
Programmable Module
Programs can be written and stored in non-volatile
EEProm memory using the ELK-MK400S Develop-
ment Kit. Typical Applications include: Program-
mable Delay Timer, Alarm Memory, Single Zone
Security System, Cross Zoning, Access Control,
Pulse Stretcher, Pulse Counter, Swinger Shutdown.

FEATURES:

•
Two Digital Inputs
•
Two Form C Relay Outputs
•
Four Timers, 1/10th Sec. - 255 hours
•
Four General Purpose Counters, 0 - 255
•
Non-volatile EEProm Memory
•
LED Output Indicators

SPECIFICATIONS:

•
Compact Enclosure Size: 4.5" x 3" x 1.2"
•
Operating Voltage: 9.6-15 Vdc
•
Current Required: 70 mA
•
Relays, 12 Amps @ 28VDC or 120VAC

REQUIRES:

•
12 Vdc Power Supply
•
Optional:Starter Development Kit(ELK-MK400S)
Features and Specifications subject to change without notice
PO Box 100 • Hwy. 70W
Instructions Printed On Inside
(828)397-4200 Voice
(828)397-4415 Fax
http://www.elkproducts.com
email: info@elkproducts.com
•
Hildebran, NC 28637 • USA
L353 3500