Environment Friendly Disposal; Warranty - Brabantia BBEK1130 Instruction Manual

Important!
This appliance must be earthed. The wires in the cord set are coloured as follows:
Blue - Neutral, Brown - Live, Green & Yellow - Earth (For detachable plug only)
If the colours of the wires in the mains lead of this appliance do not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire that is coloured green & yellow must be connected to the terminal in the plug
that is marked with the letter E or by the earth symbol, or coloured green & yellow. The
wire that is coloured blue must be connected to the terminal that is marked with the
letter N or coloured black. The wire that is coloured brown must be connected to the
terminal that is marked with the letter L or coloured red.

ENVIRONMENT FRIENDLY DISPOSAL

This marking indicates that this product should not be disposed of with
other household waste. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable re-use of material resources. To dispose of your
appliance correctly, please contact or take it to your local refuse/recycling
centre. Alternatively, contact your local council for information on your local re-use
centre. Please make this product environmentally safe for recycling.

WARRANTY

In the unlikely event that you have a problem with your Brabantia appliance, please be
aware that your Brabantia appliance has a warranty.
Warranty exclusions:
The warranty will not be valid if:
1. The product has not been installed, operated or maintained in accordance with the
manufacturer's operating instructions provided with the product.
2. The product has been used for any purpose other than its intended function.
3. The damage or malfunction of the product is caused by any of the following:
- Incorrect voltage
- Accidents (including liquid or moisture damage)
- Misuse or abuse of the product
- Faulty or improper installation
- Mains supply problems, including power spikes or lightning damage
- Infestation by insects
- Tampering or modification of the product by persons other than authorised
service personnel
- Exposure to abnormally corrosive materials