Advertisement
5
8
1. Traction rod
2. Jam nut
3. Rod-end bearing
4. Linkage plate
3
Adjusting the Traction Rod
No Parts Required
Procedure
1. Adjust the tension on the springs as shown in
2. Adjust the neutral switch as shown in
4
7
Figure
Figure
7.
2
3
Figure 6
5. Rubber mount
6. Traction-lever arm
7. Plastic mount
8. Plastic washer is only used with the plastic mount
7.
1. 41 mm (1.61 inches)
2. Neutral switch
3. 2.8 to 3.5 mm (0.110 to
0.140 inch)
3. Move the traction pedal to the neutral position, adjust
the rod-end bearing by threading it in or out to achieve
the dimension shown in
4
6
1
Figure 7
4. Neutral-arm assembly
5. Spring hook
Figure
8.
g200729
g200730
Advertisement
