Switching On/Off; First Time Installation - Hitachi 50HK25T74U Instruction Manual

Switching On/Off

To Switch the TV On
Connect the power cord to a power source such
as a wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
• Press the Standby button, Programme +/- or
a numeric button on the remote control.
• Press the middle of the side function switch
on the TV in.
To Switch the TV Off
Press the Standby button on the remote control
or press the middle of the side function switch on
the TV in and hold it down for a few seconds, the
TV will switch into standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched into standby mode, the
standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
The LED can also blink when you switch on the TV from
standby mode.

First Time Installation

When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK. In the following steps of
the installation guide, set your preferences using
the directional buttons and OK button.
On the second screen set your country
preference. Depending on the Country selection
you may be asked to set and confirm a PIN at this
point. The selected PIN cannot be 0000. You have
to enter it if you are asked to enter a PIN for any
menu operation later.
You can activate Store Mode option in the next
step. This option will configure your TV's settings
for store environment and depending on the TV
model being used, the supported features of it
may be displayed on the side of the screen as
an info banner. This option is intended only for
store use. It is recommended to select Home
Mode for home use. This option will be available
in Settings>System>More menu and can be
turned off/on later. Make your selection and press
OK to continue.
Depending on the model of your TV and the
country selection Privacy Settings menu may
appear at this point. Using this menu you can
set your privacy privileges. Highlight a feature
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
and use Left and Right directional buttons to
enable or disable. Read the related explanations
displayed on the screen for each highlighted
feature before making any changes. You can
use Programme +/- buttons to scroll up and
down to read the entire text. You will be able
to change your preferences at any time later
from the Settings>System>Privacy Settings
menu. If the Internet Connection option is
disabled Network/Internet Settings screen will
be skipped and not displayed. If you have any
questions, complaints or comments regarding
this privacy policy or its enforcement, please
contact by email at smarttvsecurity@vosshub.
com.
Highlight Next and press OK button on the
remote control to continue and the Network/
Internet Settings menu will be displayed. Please
refer to Connectivity section to configure a wired
or a wireless connection. If you want your TV to
consume less power in standby mode, you can
disable the Wake On option by setting it as Off.
After the settings are completed highlight Next
and press OK button to continue.
On the next screen you need to agree to the
terms and conditions of Freeview Play to make
use of the related services. Scroll the page to
read the entire text using the up/down directional
buttons or Programme +/- buttons. Highlight
Yes and press OK on the remote to confirm and
proceed. Highlight No and press OK to proceed
without confirmation. For further requirements
for Freeview Play services refer to the Freeview
Play Platform section.
On next screen you can set broadcast types to be
searched, set your encrypted channel searching
and time zone (depending on the country
selection)preferences. Additionally you can set a
broadcast type as your favourite one. Priority will
be given to the selected broadcast type during
the search process and the channels of it will be
listed on the top of the channel list. When finished,
highlight Next and press OK to continue.
About Selecting Broadcast Type
(For use in the UK the default will be
D.Aerial)
To turn a search option for a broadcast type
highlight it and press OK. The checkbox next to
the selected option will be checked. To turn the
search option off clear the checkbox by pressing
English - 16 -