Singer 6038 Lnstruction Book page 41

SINGER
I
I
nserting a bobbin
DO NOT FORGET TO SWITCH OFF THE MACHINE
WHILE WORKING IN THE BOBBIN AREA.
1. Uft presser foot.
Z. Turn hand wheel toward your direction until
needle is in its highest position.
3. Pull approximately 10 em of thread from repla-
cement bobbin and insert bobbin into case
(illustration 1).
Note: While unwinding, the bobbin shall turn from
right to left.
4. Holding bobbin in place, guide thread into slot A
(illustrationZ) .
5. Guide the line down the slot to the left around
until guiding slot B (illustration 3).
6a Close the bobbin visar partíally allowíng some
thread (illustration 4).
A
3