Advertisement
S1200Na
SOFTWARE APPLICATION GUIDE
1.3> Program: Obtain the information of currently used configuration file (Disconnection status),or the
information of current program in the equipment(Connection status).
On disconnection status, only Display Current Program No
"
Edit Current Program Name
changes do not affect the equipment internal program settings.
On connection status, all items are valid under the Program menu. If selecting the
Program Name
"
If selecting the Load Factory Default Configuration command, the current program is overwrite
"
by the default setting automatically (! Attention Please: this operation will overwrite the current
program configuration, before executing this operation, please make sure you really ready to load
factory default settings). Details of other function items (such asList Program & Recall and Save
as current program in device
1.4> Device: Modify the device information, and saved in the equipment automatically, only valid on
connection status;
1.5> Help: the control software version information.
2.Connecting the device.
2.1> Three hardware connection solution(USB,RS-232,RS-485) are available for your connecting;
2.2> After connected the device with computer port by connector, Click the "Communications", select
"E nable Communications" command to start the connecting. See Figure 2:
The software will search the connected (hardware connection) device automatically,
Device...
"
will be shown at the bottom of interface's status bar, see Figure 3:
"
"
and Load Factory Default Configuration
"
command, the current program name auto saved in the equipment;
"
)under the Program menu, please refer to following description.
" "
, Display Current Program Name ,
"
"
"
"
"
"
Picture 2
8
"
"
may be valid. All
"
Edit Current
"
"
"
Search
Advertisement
