Genie Lift Guard GS-30 Operator's Manual Supplement page 6

Operator's Manual Supplement
Operating Instructions
Operating Instructions Operati ng Instr ucti ons
Contact alarm activated, beacon lights flash and an
audible alarm sounds. Lift and drive functions will
not operate from the platform controls.
Note: The potential hazard must be acknowledged
by the operator to continue operating the machine.
After the potential hazard has been acknowledged,
machine functions will resume operation at
reduced speeds.
Platform Controls Operation
1 Return the joystick to the center position and
release the function enable switch to
acknowledge the potential hazard.
2 Continue machine functions to reach the
working location or to move the machine away
from the potential hazard.
Note: To restore machine functions after the
Contact Alarm has been activated, the machine
must be driven or lowered until the actuator arm is
deactivated. Pushing in the red Emergency Stop
button to the off position will not restore machine
functions, this action will only turn off the Contact
Alarm lights and alarm.
4 Lift Guard™ Contact Alarm
First Edition • First Printing
Part No. 1288739GT