6.1.2. Camera Link connection (for C-RED 3 CL only) ................17 ® 6.1.3. USB connection (for C-RED 3 USB only) ..................18 First Light Imaging SAS Europarc Sainte Victoire – Bât. 6 Route de Valbrillant Le Canet |13590 MEYREUIL FRANCE...
Page 3
Europarc Sainte Victoire – Bât. 6 Route de Valbrillant Le Canet |13590 MEYREUIL FRANCE +33 (0)4 42 61 29 20 First Light Imaging SAS au Capital de 85 000 euros 533 716 817 RCS Aix-en-Provence TVA : FR78 533 716 817...
Page 4
Europarc Sainte Victoire – Bât. 6 Route de Valbrillant Le Canet |13590 MEYREUIL FRANCE +33 (0)4 42 61 29 20 First Light Imaging SAS au Capital de 85 000 euros 533 716 817 RCS Aix-en-Provence TVA : FR78 533 716 817...
Page 5
Europarc Sainte Victoire – Bât. 6 Route de Valbrillant Le Canet |13590 MEYREUIL FRANCE +33 (0)4 42 61 29 20 First Light Imaging SAS au Capital de 85 000 euros 533 716 817 RCS Aix-en-Provence TVA : FR78 533 716 817...
Thanks to its advanced technology in electronics, software, and its innovative mechanics, C-RED 3 is capable of unprecedented performances: up to 600 images per second at full frame. C-RED 3 offers Camera Link® or USB3 interface depending on your camera configuration.
Note 1: Cooling unit and personal computer can be bought separately. Note 2: The latest release of software is available on demand at: support@first-light.fr. Note 3: A list of C-RED 3’s various accessories are available on demand at: contact@first-light.fr Note 4: Items may differ from pictures.
The mating connector is a FISCHER CONNECTORS S 102 A053-130+. On the left, C-RED 3 USB back view. The yellow box shows the female power connector cabling. On the center, C-RED 3 CL back view. The yellow box shows the female power connector cabling.
Full interface requires two data cables with male SDR-26 Mini Camera Link connectors ® ® as shown in Fig. 5 : On the left, C-RED 3 back view. The yellow box shows the female Camera Link connectors. ® On the right, a picture of a male SDR-26 Mini Camera Link connector.
First, plug the FISCHER CONNECTORS power connector to the camera, then plug the power unit to the line plug. C-RED 3 with power supply connected thanks to the FISCHER CONNECTORS connector. Camera Link connection (for C-RED 3 CL only) ®...
USB3). Demo GUI software The Graphical User Interface (GUI) demo software is provided in the USB key supplied with the C-RED 3 camera, or available on demand at support@first-light.fr. It is a dedicated interface developed by First Light Imaging which allows to control almost all the parameters of the camera.
Classification: PUBLIC Camera status Once the camera is properly powered up by following the steps of section 6, the system boots and C-RED 3 is ready to operate. A purple diode signal, visible through the camera’s body holes, confirms the operability.
Single Read The entire frame is read once before a reset period. The particularity of C-RED 3 readout mode allows to adjust the integration time (Tint) independently of the frame rate. Depending of these two parameters, the camera will run in ITR or IWR mode, please refer to Fig. 10 and Fig.
Sensor geometry Pixel format (ADU) C-RED 3 digitizes the signal from the sensor with 14-bits precision. However, the pixel values are sent as 16 bits signed format. Indeed, after embedded bias subtraction, some pixels may have negative value. Full frame mode Pixels are read from left to right and up to down (see Fig.
However, please note that our cameras have been developed and tested with specific grabbers, and we highly recommend using these grabbers. Any malfunctions related to the use of a non-certified grabber will not be supported by First Light Imaging List of tested and recommended grabbers: MATROX Radient eV-cl full (drivers available for Linux®...
(cf. doc install C-RED 3 demo software). When the camera is detected on the USB 3.0 port, Windows ® automatically installs the C-RED 3 drivers. Under Linux, the Firstlight USB SDK manages the frame acquisition frame using the standard libusb directly.
The camera is equipped with one sync connector on its rear side (see Fig. 21). C-RED 3 USB on the left and C-RED 3 CL on the right from the back. The yellow box shows the sync connectors C1. To be connected on the external synchronization, use the command “set extsynchro on” in the command line interpreter.
Date : 19/07/2019 Issue: 001 Classification: PUBLIC On the left, a C-RED 3 synchro female connector. On the right, wire cables corresponding to connector. Input signals (Trigger_in and FPS_Tint_in) are 5V compatible. The maximum voltage value is 5.5V. Applying higher voltage will result in a permanent damage of the camera.
Bad Pixel Correction Bad pixel correction can be made on the fly by the camera. During the production/characterization of the camera, First Light Imaging computes a map of the bad pixels and upload it into the camera. When enabled, bad pixel correction is the first correction applied on pixel values received from the sensor.
On uncooled cameras, the sensor temperature vary with the environment temperature. The bias file initially built will be obsolete if the temperature changes. To keep a good corrected image whatever the temperature is, the C-RED 3 camera embeds an automatic system which recalculates the bias file applied according to the sensor’s temperature.
To read the current dark optimization value, use the command: “darkoptimlevel” Tag generation The C-RED 3 camera offers the possibility to replace the first 4 pixels of acquired images by information generated by the camera. This function is controlled by the “set imagetags on” and ”set imagetags off” commands.
Factory camera presets can be restored using the “restorefactory” command. Camera optional features. C-RED 3 camera is provided with HDR optional feature. This extra feature is enabled through license file uploaded into the camera during the production, or later directly by the customer.
For details on some advanced commands like “snake command”, please contact First Light Imaging at support@first-light.fr. Commands format detail C-RED 3’s command line interpreter (aka CLI) on the CL or USB serial link is simple: Commands are only composed of ascii characters. Each command must be ended with line feed character: ‘\n’...
10. PRECAUTIONS AND MAINTENANCE Precaution of use Your C-RED 3 is a high-end scientific instrument, if this equipment is used in a manner not specified by the manufacturer the protection provided by the equipment may be impaired and the warranty will not be applicable.
Need help?
Do you have a question about the C-RED 3 and is the answer not in the manual?
Questions and answers