1. Manuals
  2. Brands
  3. First Light Manuals
  4. Digital Camera
  5. C-RED 2
  6. Quick start manual

First Light C-RED 2 Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

C-RED 2
Quick Start Manual
C-RED 2 Quick Start_20180622

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C-RED 2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for First Light C-RED 2

Summary of Contents for First Light C-RED 2

  • Page 1 C-RED 2 Quick Start Manual C-RED 2 Quick Start_20180622...

  • Page 3: Symbols And Indications

    Thank you for choosing C-RED 2! C-RED 2 features and performances are described in detail within the User Manual, that you can find on your USB key or on our website: www.first-light.fr/downloads/ Please contact our support for any question at: support@first-light.fr...

  • Page 4: Technical Specifications

    3. DISPOSAL In case of disposal, do not throw your camera in waste disposal and send it back to First Light Imaging 4. WARNINGS General warnings The equipment must be plugged on an electrical wiring compliant with the relevant standards in the country (in France: NFC 15-100).

  • Page 5: Contents Of Package

    6. CONTENTS OF PACKAGE* C-RED 2 Camera Pack Item name Quantity Picture Camera Power supply IEC cable USB-C to USB-A cable USB key with User manual + Demo software + Test report Quick start Manual Accessories Please note that accessories can be ordered separately. Please contact your sales representative for details and pricing of our different accessory packs.

  • Page 6: Camera Description And Start Up

    100 W minimum Heat is evacuated by circulating a cooling fluid through two ports (G1/8 thread). To fasten your connectors, First Light Imaging recommends using Loctite 577 thread sealant. The cooling hoses can be fastened in any order. After turning on the cooling unit, please check that no leaks are visible.

  • Page 7: Power Supply Connection

    To use the camera USB connection, please use a windows 10 OS. Also before using USB-3.1 Gen 1 connection, the C-RED 2 USB-3.1 Gen 1 drivers must be installed on the PC. Please refer to the demo software manual.

  • Page 8: Powering Up/Down

    LEMO cable from the camera. 10. CAMERA CONTROL Demo GUI software The Graphical User Interface (GUI) demo software is provided in the USB key supplied with C-RED 2, or available on demand at support@first-light.fr. Camera status Once the camera is properly powered up the system boots and C-RED 2 is ready to operate.

  • Page 9: Operational Environment

    Absolute pressure: 500 mbar* to 2 bar * First Light Imaging recommends using liquid cooling for pressure lower than 1 bar Dew point: Please use the cooling fluid at a temperature above the dew point. If the dew point is unknown, use a cooling fluid at a temperature which is not below the room temperature.

  • Page 10: Maintenance

    C-RED 2 is a high end scientific instrument and should not be exposed to shocks, extreme temperatures, humidity, dusty environment, and static shocks. Any electronic equipment that has to be connected to C-RED 2 should be fitted with appropriate protection on all power lines.
  • Page 11 15. CONTACTS For the USA: FIRST LIGHT IMAGING Corp. 185 Alewife Brook Parkway, Ste 210 Cambridge, MA 02138 Tel.: + 33 4 42 61 29 20 E-mail: support@first-light.fr Website: www.first-light.us For the rest of the world: FIRST LIGHT IMAGING SAS Europarc Sainte Victoire, Bât.
  • Page 12 Notes...
  • Page 13 Notes...

Table of Contents