Gira 0644 Series Installation Instructions

Blind/shutter control pushbutton
GIRA
Info
Installation Instructions
Blind/shutter control pushbutton
Blind/shutter control pushbutton with sen-
sor input
Blind/shutter control pushbutton
Function
The control pushbutton is a component of the blind/
shutter control system and can only be used in con-
junction with the blind/shutter control insert.
A press on the button raises the blind/shutter while
a press on the button lowers the blind/shutter.
The moving time of the blind/shutter can be individu-
ally selected between 4 seconds and 2 minutes (pre-
set value = 2 minutes).
The attachment is additionally equipped with a lock-
ing function to prevent any inadvertent automatic low-
ering of the blind/shutter.
Blind/shutter control pushbutton
Safety warnings
Attention: Electrical equipment must be installed
and fitted by qualified electricians only.
Failure to observe the warnings may cause dam-
age to the device and result in fire or other haz-
ards.
To prevent electric shocks, disconnect the
mains supply (by cutting out the circuit breaker)
before working on the device or on the load.
The blind/shutter control system has been devel-
oped for the control of window blinds and win-
dow shutters. Do not switch other loads.
Using the device for other applications such as
the control of roller-shutter doors may involve
hazards.
These hazards must be excluded by the user by
taking appropriate safety measures (e.g. light
barriers).
Observe also the safety warnings set out in the
operating instructions of the respective blind/
shutter control insert used.
12/04
Order no.: 0644 xx
Order no.: 0820 xx
Page 1 of 4