Prepare The Remote Control; Battery Installation; Precautions Concerning Batteries - Hisense HA450 User Manual

Prepare the Remote control

The Remote Control allows unit to be operated from a distance.
- Even if the Remote Control is operated within the effective range 19.7 feet(6m)inch,remote control
operations may be disrupted if there are any obstacles between the unit and the remote control.
- If the Remote Control is operated near other products that generate infrared rays, or if other remote
control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the
other products may operate incorrectly.

Battery Installation

1. Remove the battery compartment cover on the
back of the remote control.
2. Load one AAA/1.5V battery into the battery
compartment making sure that the battery has
been inserted with the correct polarities
matching the symbols+,- as indicated inside the
battery compartment.
3. Replace the cover.

Precautions Concerning Batteries

- When the Remote Control is not to be used for a long time(more than a
month), remove the battery from the Remote Control to prevent it from
leaking.
- If the battery leak, wipe away the leakage inside the battery compartment
and replace the battery with new one.
- Do not use any battery other than those specified.
- Do not heat or disassemble batteries.
- Keep away from heat or moisture.
- Do not carry or store battery with other metallic objects.
Doing so could cause batteries to short circuit, leak or explode.
- Never recharge a battery unless it is confirmed to be a rechargeable type.