HEED CanAmp Owner's Manual

canamp_guide.qxd 2009.06.16.
TECHNICAL SPECIFICATIONS
Input sensitivity/impedance:
Power output:
Signal-to-noise ratio (unweighted):
Distortion (THD, 1 kHz, 100mW):
Frequency range:
Power consumption:
Dimensions:
Weight:
WARRANTY
If within three years of the purchase date your Heed CanAmp proves
to be defective for any reason other than accident, misuse, neglect,
unauthorised modification or fair wear and tear, Heed Audio Ltd. will,
at its discretion, replace the faulty parts without charge for labour.
This factory warranty is valid only for units sold into countries with no
appointed Heed distributor. Service enquiries in countries with
appointed distributor should be addressed first to the supplying
dealer and or Heed distributor/importer. Warranties granted in
these countries are entirely at the discretion of distributor.
DISTRIBUTOR CONTACT
FACTORY CONTACT
HEED Audio Kft. (Ltd.)
Reviczky Gyula u. 9-11
H-1181 Budapest
Hungary
11:57 Page 1
200 mV/10 kOhm
300 mW (100 Ohm)
85 dB
<0.05%
10 Hz-50 kHz (±0.5 dB)
<15 W
9x6x22 cm (W/H/D)
1.5 kg
Tel/Fax: +36 1 2947401
Email: info@heedaudio.hu
Web: www.heedaudio.com
HEED CanAmp
headphone amplifier
Dear Music Lover,
Thank you for choosing our product!
In designing the Heed CanAmp, our objective was to produce a
headphone amplifier that conveys all the emotional content and
immediacy of your recordings faithfully, allowing the atmosphere,
tension, and excitement of the original performance to shine
through in an organic, true-to-life fashion.
We sincerely hope that you will agree, and that your CanAmp
will provide you with many years of impeccable, trouble-free
Operation.
Happy listening!
The Heed Team
Your Heed CanAmp headphone amplifier is designed to offer the finest
performance available by avoiding compromise, wherever possible. This
guide contains advice specifically related to using this amplifier, as well
as more general warnings about the use of domestic audio components.
Please read them carefully.