Read these instructions before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
HOT SURFACE! This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. CAUTION! Magnetic field! This symbol informs that the magnetic fields occurring during the device operation may cause interference.
Page 5
The device must be operated in correct and safe technical condition only. In case of operational problems disconnect the device from the power supply and contact the service company. Prevent access of children to the package materials like plastic bags and foamed polystyrene elements.
Page 6
Check the power cord regularly for damage. Do not use the device if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers. ...
Page 7
Do not place any metal kitchen utensils, pot covers, frying pans, knives, or other metal objects on the cooking field. After the device activation they may become very hot. Keep in mind that the objects like rings, watches, etc. may become hot in the vicinity of the cooking surface.
Page 8
Do not heat closed containers, e.g. canned food, on the induction cooking field. The containers or cans may explode (crack) due to overpressure. Open the can and place it in the pot with some water heated on the cooking field. CAUTION! Electromagnetic field hazard! To avoid the hazard results please follow the instructions below.
Induction bowl is made of heat resistant glass. In case of damage, even if it is only a small fracture, the device should be immediately disconnected from the power supply and you should contact the service company. 1.3 Use as intended Every use of the device for a different purpose and/or in a way that diverges from the intended use is not allowed and is assumed as the use against the intended purpose.
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data 4.1 Overview of parts Housing Induction bowl Digital display Control knob Feet (4x) Grease filter (fig. below) 4.2 Grease filter The induction wok is equipped with the grease filter. It is located at the bottom of the device. The grease filter is to protect the body from dirt and grease sucked by the fan together with the air.
5. Installation 5.1 Positioning Unpack the device and remove all package materials according to the valid environment protection regulations. CAUTION! Never remove the rating plate and any warning signs from the device. Place the device on top of an even, stable, dry, and water-resistant surface which supports the weight of the device and is not heat sensitive.
Induction woks 105871, 105872, 105876 are delivered ready to connect and may be connected directly to the grounded single socket. The power supply circuit with the socket must be protected by the fuse of at least 16A. Induction woks 105873 and 105874 are equipped with the power cable. The power cable must be connected to the plug or connected to the wall socket.
For this reason, do not use cookware made of aluminum, bronze or any non-metallic cookware. The following wok pans from Bartscher can be used with the induction wok: Code no.: A105960 Code-No.: A105971 Code-No.: 105981...
6.3 Operation of the device Before the operation, clean the device according to the instructions presented in section 7 „Cleaning“ Place an suitable wok pan with the dish to be cooked in the induction bowl. CAUTION! Do not put a dish without any content in the induction bowl. With longer heating of empty dish it may become very hot which might lead to overheating of the device.
Page 19
Power setting If an appropriate wok is placed in the induction bowl, the fixed power level is shown on the digital display. The power level may be changed at any moment by turning the control knob right / left (to increase / decrease power). Possible power level settings and appropriate data regarding power (in Watts) for the device are presented in the table below.
As soon as the pan is removed from the induction bowl, the displayed power level starts flashing. This means that there is no cooking pan on the hob. If the power level indicator flashes when a cooking pan is placed in the induction bowl, this means that the material of which the cooking pan is made is not appropriate for induction cooking.
Page 21
o Clean the device regularly. o Clean the induction bowl, housing and control panel with soft, moist cloth or sponge and a mild non-abrasive cleaning agent. o Soak the stubborn dirt on the hob with water and remove the residues with scrapper for ceramic glass.
8. Possible malfunctions If the device malfunctions and an error code appears on the digital display, verify based on the following table whether the malfunction may be removed before contacting the service company or sales agent. Information about error codes (3000 W / 3500 W devices) Error Description Solution...
Page 23
Information about error codes (5000 W / 7000 W devices) Error Description Solution codes Short-circuit of the temperature sensor Contact the service of ceramic glass or damaged cable company Short-circuit of the electronic Contact the service temperature sensor or damaged cable company Problems with three-phase voltage Check the electric power...
Page 24
Malfunction Problem Possible reason Solution Fuse is blown at the Device connected is Check the electric power start-up damaged supply or whether the electrical connection was done properly Fan is working for a few Cooling of electronic Normal operation minutes after the device’s components switch-off The device does not work,...
Electric devices should be used and disposed of properly to prevent the impact on the environment. Disconnect the device from the power supply and remove the power cord from the device. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...