Morphy Richards Precise Steam Plus Instructions Manual page 7

40730MCZ Rev1:9225 47507 MEE pump - Jon
9 Disconnect the iron from mains
supply outlet.
10 Hold the iron horizontally over
a sink.
11 Press and hold down the Self-
Cleaning button.
12 Steam and boiling hot water will
drain from the holes in the the
soleplate washing away the scale
and minerals that have built up
inside the Steam Chamber.
13 Gently move the iron back and forth
until the water tank is empty.
14 When Self-Cleaning is complete,
release the Self-Cleaning button.
15 Rest your steam iron back on its
heel and allow to fully cool down.
16 Wipe the soleplate with a cold
damp cloth.
WARNING: Keep hands and
body away from the hot water.
WARNING: Do not attempt to
descale the soleplate with
descaling products.
To clean a stainless
steel soleplate
To keep the soleplate of your iron
clean and free of limescale, we
recommend that you use one of the
gentle chrome, silver or stainless
steel cleaners that are generally
available. Always follow the
manufacturers instructions. To clean
off melted man-made fibres set the
iron at 3 dot position and pass it
over a clean piece of cotton which
will draw the deposit off the surface.
10/10/08 16:02
To clean a coated
soleplate
(certain models only)
In the unlikely event of any man-
made fibre fusing to the soleplate,
set the iron at the 3 dot position and
pass it over a clean piece of cotton
which will draw the deposit off the
surface.
Do not use scouring powder or
solution as this could cause
damage to the coating.
To clean the exterior
Allow the iron to cool and wipe over
with a damp cloth and mild
detergent, then wipe with a dry
cloth.
Page 7
g
7