Floorpul ruby 48 blt Use And Maintenance page 16

RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL
PPL (Polypropylene)
NYLON
TYNEX
BRISTLES THICKNESS
PAD HOLDER
MACHINE CODE QUANTITY DESCRIPTION
ruby 48 blt
48902010
48902020
48902030
48902040
48902050
48902060
48802010
48802020
CHARACTERISTICS
Good wear resistance. Maintains characteristics with hot water up to 50°C. It is not hygroscopic.
Excellent wear resistance, even with hot water. It is hygroscopic.
Nylon bristles with grains of abrasive material. Use with caution in order not to mark the floor or ruin the
polishing.
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints. On irregular floors
with deep joints or relieves, it is recommended to use softer bristles which penetrate more easily and deeper.
Please be aware that when brush bristles are worn out and therefore too small, they become rigid and unable to
penetrate and clean deeper. This may also happen with thicker bristles creating brush vibration.
It is equipped with anchor points which permit the blocking of the abrasive pad during work. The pad is
recommended to clean smooth floors.
1 Brush PPL 0,3 Ø 508
1 Brush PPL 0,7 Ø 508
1 Brush PPL 0,9 Ø 508
1 Brush TYNEX Ø 508
1 Brush PPL 0,6 Ø 508
1 Brush 5-mix Ø 508
1 Pad holder Ø 495 + center lock green
1 Pad holder Ø 495 + center lock black
USE
Irregular floors with large joints.
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
Normal floors.
For all types of floors.
For pads of 20", for smooth surfaces cleaning.
For pads of 20", for smooth surfaces cleaning.