Table of Contents
Advertisement
Step
6. _
Entering the Customer Password
For details, refer to the "Passwords" chapter of the IBM 3745 Advanced
Operations Guide,
SA 33-0097.
Note: An A6 alarm may be normal at this step of the procedure, so
long as the time and date are not entered (see step 9).
a. The first screen that appears at the local console after IML dis-
plays the CA status. Press F4. The message ENTER PASSWORD
is displayed.
b. Type IBM3745 (customer default local password), and press SEND.
The function selection rules screen is displayed.
c. Press F4 to get Menu 1.
d. 'Type PSW and press SEND.
e. Type IBM3745 (customer default management password), and
press SEND.
Step
7. _
Updating and Activating the Maintenance Password
a. From the password selection screen, select option 4 and press
SEND.
b. Type a new maintenance password of your choice (five to eight
alphanumeric characters, and must be different from the customer
password), and press SEND.
c. Press F4 to get the RSF modem transmission mode screen.
• In the U.S.A.lCanada/Japan: Enter
F
(duplex transmission),
and press SEND.
• In the other countries: Enter
H
(half-duplex/1200 bps/V.23) or
F
(duplexl2400 bps/V.22-bis) depending on the RSF ports used
in the country, and press SEND.
Note: Ask your country's RETAfN* coordinator for current infGrma-
tion.
d. Press F6 to return to the password selection screen.
e. Select option 7 and press SEND for a permanent activation of the
maintenance password.
f. Press F1 to return to Menu 1.
Step
8. _
Entering Maintenance Mode
a. Type OFF and press SEND to log off (the CA status screen is dis-
played).
b. At the control panel, select Service Mode
=
2, and press the Vali-
date key.
c. At the local console, press F4 to get the password screen.
d. Type the new maintenance password that you entered in step 7
above, and press SEND (the function selection rules screen is dis-
played).
e. Press F4 to get Menu 1.
Step
9. _
Entering Time and Date
a. From Menu 1, type TIM (Time Services), and press SEND.
b. From the TIM-screen, select option 1.
c. Type date (MM/DO/YY), time (HH:MM), and day (1 to 7).
d. Press SEND. Message DATA SUCCESSFULLY TRANSMITTED
should be displayed.
e. Press F1.
3-6
3745
Models
130, 150,
and
170
Installation Guide
Advertisement
Table of Contents
