Table of Contents
Advertisement
B.2
DIO Programming
The VPC-3350S utilizes FINTEK F81866D chipset as its Digital I/O controller. Below are
the procedures to complete its configuration. AAEON initial DI/O program is also
attached for developing customized program for your application.
There are three steps to complete the configuration setup:
(1) Enter the MB PnP Mode
(2) Modify the data of configuration registers
(3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited
normally.
Appendix B – Digital I/O Ports
68
Advertisement
Table of Contents
