3.2
AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic
system configurations, which is stored in the battery-backed CMOS RAM and BIOS
NVRAM so that the information is retained when the power is turned off.
To enter BIOS Setup, power on the system and immediately press <Del> or <Esc>.
The function for each interface can be found below.
Main – Date and time can be set here.
Advanced – Configure major system features (CPU, Super IO, Hardware Monitor, etc.)
Chipset – Configure chipset features.
Security – The BIOS administrator and user passwords can be set here
Boot – Set boot priorities and configurations.
Save & Exit –Save your changes and exit system setup.
Chapter 3 – AMI BIOS Setup
33