Table of Contents
Advertisement
8.4.
Standing up
The standing mechanism is powered by an electrical actuator system (lifting motor). The actuator is
fed by two recharcheable batteries (see section 9).
Trough using the control switch on the armrest the actuator will be pushed up or down.
20
8.5. Sitting down
To drive back in the seating position, push the control switch down. The actuator engages and
drives the seat down as long as you push the control switch.
• Hold the control switch until you have reached the lowest possible seated position and the motor
stops from alone.
Press the switch up to stand
up. Let go to stop. Push the
switch down if you want to sit
down.
• To stand up push the control switch up (see photo 20). The
actuator engages and will drive up the seat as long as you press
the switch.
• The motor stops automatically as soon as the maximal standing
position is reached. The leg supports sit firmly on the ground
what ensures the child's stability while standing.
23
Advertisement
Table of Contents
