Suunto Wristop Computer X10 User Manual page 45

When the EPE = 1m and GPS signal strength indicator shows 5 bars, the location is
updated automatically. You can also accept a lower accuracy by pressing ENTER.
Erasing a route
44
To erase a route:
1.In the Set menu, scroll to Route and press ENTER. The
route list is displayed.
2.Select the route you wish to erase with UP/DOWN and
press ENTER.
3.scroll to Erase and press ENTER. Suunto X10 asks you to
confirm the action.
4.Press ENTER to confirm the action. Suunto X10 displays
the message '
ERASING ROUTE
Route menu.
Erasing waypoints
To erase a waypoint:
1.In the Set menu, scroll to Route and press ENTER. The
route list is displayed.
2.Select a route with UP/DOWN and press ENTER. A list of
waypoints is displayed.
3. Select a waypoint with UP/DOWN and press ENTER. The
waypoint menu is displayed.
4.Scroll to Erase in the waypoint menu and press ENTER.
Suunto X10 displays the message '
5.Press ENTER to confirm the action or STOP/BACK to keep
the waypoint. You return to the waypoint list.
', after which you return to the
ERASE WAYPOINT
?'.