Suunto Wristop Computer X10 User Manual page 37

Distance to waypoint:
When the GPS is on, the second row displays the distance to the next waypoint.
Shortcuts:
The third row displays alternatively the time, bearing (bea) or estimated time to
waypoint (ttw). Change the displayed information with STOP/BACK. You can select a
shortcut from the NaviData function to replace the ttw. (For more information, see
Section 3.5.7. Navidata.)
Time: Displays the current time
Bearing (bea): Displays the bearing to the next waypoint in degrees.
36
Waypoint:
When Navigate is on, the first row displays the name and
number of the navigated waypoint. If Navigate is off, it
displays the position where the GPS was first activated (this
point is named START).
Time to waypoint (ttw): Displays the estimated travel time to
the next waypoint based on the current speed.
NOTE: When Navigate is off but the GPS is on, all values
refer to the start point.
NOTE: If the GPS is off, the unit always displays the selected
route, the total length and the current time.