Laser Product - Dynavin N7 Pro platform Owner's Manual

Never use safety-related connections or mounting points such as steering, braking systems, or other
vehicle-related safety components for your safety and the safety of others. Connect the device only to
those car-specific power and ground points specified by Dynavin.
Avoid settings on the device which may cause distractions to the user while driving thereby
endangering yourself and others. Please review and follow the driving laws of your state/country.
References of Legal Regulations for Operation
Install the device only in the intended domain. The warranty will be voided if the unit is not installed
properly or unapproved alterations are made.
Use only original CD/DVD no Mini-Disks or other shaped disks. This can damage the disk drive of the
unit.
The CD/DVD drive may have shipping screws inserted on the top side of the unit. Remove these
before installation otherwise no media can be introduced into the drive.
Marking of products using laser scanners
Class 1

Laser Product

Declaration of Conformity with respect to the EMC regulation ETSI EN301 489
Declaration of Conformity with regard to radio regulation ETSI EN300328
Declaration of Conformity with regard to safety regulation EN60065
4
This marking indicates the contained components in the appliance
using a weaker class 1 laser for scanning media.