General Information - Dynavin N7 Pro platform Owner's Manual

General Information

Thank you for choosing Dynavin.
The Dynavin brand has existed for over 11 years and has developed into one of the best retrofit
equipment manufacturers. In 2008, Dynavin began based on an idea to offer drivers an OEM-look
multimedia radio system not only with significantly better features than the original system, but also
with the same optical performance. Dynavin continuously works to improve its products allowing
Dynavin head units to be offered to over 30 models and currently have the largest technical standard
on the market.
We have paid special attention to your personal safety during the development of Dynavin products
combined with maximum ease of use, modern design, and the latest technology possible. However,
please be aware if installed, used, or handled improperly, injury and/or damage may occur. Please
read this instruction manual completely and carefully and keep it with you!
This product meets the requirements of the applicable European and national guidelines. Conformity
has been established and the relevant documents and explanations are available from the
manufacturer.
Dynavin features, software, and performance is subject to change at any time without notice in the
interest of technical progress and adapting to the vehicle market. Before installing the unit, please
review the legal regulations in your country. Non-compliance with the law may lead to significant
penalties.
Dynavin and its recognized partners, resellers, and distributors are not liable for any direct or indirect
damages or losses nor responsible for costs or fees resulting in reinstallation, uninstallation, and/or
diagnosis. All necessary installation steps are performed upon customer request with the knowledge of
the possible product incompatibility or that the product's operations can vary depending upon vehicle.
Dynavin or its recognized distributors and dealers are not responsible for installation and removal costs
or losses. Despite all efforts and various testing carried out by Dynavin and its recognized
partners, suppliers, and distributors cannot guarantee 100% compatibility with all original features on
all vehicles or equipment variations of the specific models.
If the electrical system in your vehicle suddenly has an irregular or improper function, unplug the
product from the vehicle electronics and call for an inspection at an authorized workshop.
For warranty or repairs, please contact your dealer or distributor. Please save your original packaging.
Note: You must first contact your dealer/distributor before returning and follow their specific return
requirements (RMA procedure).
Any of the following will void your warranty:
a) Tampering with the device or accessories without the approval of the manufacturer or its partners
b) Opening the housing of the device
c) Repairs to the device not performed by the manufacturer or its partners
d) Improper usage or operation
e) Physical or water damage to the device due to dropping, willful damage, accident, flooding, fire, etc.
Install in accordance with all safety regulations and legal provisions.
For your safety:
Ensure the installation is carried out only by a trained specialist. Installation should only be performed
when vehicle is de-energized. In certain installations, the battery must be disconnected from the
electrical system. Be sure to check the provisions of the vehicle manufacturer as changing the vehicle
electronics may result in loss of warranty.
3