Table of Contents
Advertisement
5. See note below before continuing.
This step includes the upper strut rod installation and brake line routing for
Once you've completed Step 3 and before you fasten the upper strut rod bolt,
move the strut rod
and master cylinder over top of the rear right sub-frame tubing
and under the gas tank
e
the strut rod
Some Kawasaki models can use secondary bolt hole in the strut rod for lower
Bolt in place using the original upper strut rod bolt or pin and torque to the
bike manufacturer's specifications. Once you have the upper portion of the
strut rod in place, torque the lower portion of the strut rod to the specification
listed below.
Kawasaki models only.
e
up to provide enough clearance, feed the brake line
C
as seen in the image below. Now move the top of
down back into place lining up the mounting holes.
ride height.
TORQUE
60 Nm (44 Ft. Lbs)
NOTE
NOTE
INSTALLATION
B
of the bike
A
53
Advertisement
Table of Contents
