Setting Auto Power On/Off; Setting Time; Setting Alarm Clock; Displaying Calendar - Odys DPF LOOK User Manual

Setting auto power on/off

You can enable the Digital Photo Frame to turn on or off automatically at the specified time.
Note: The current time must be set correctly before setting up this feature.
1. Press the [SETUP] button. The Setup Menu appears on the screen.
2. Press the [ ] or [ ] button to select AUTO POWER ON or AUTO POWER OFF.
3. Press the [ ] or [ ] button to highlight next or previous setting (hour, minutes, schedule). And press the [ ] or [ ] button to adjust the
time or select the schedule as below.
Off: Disables the auto power on or off function.
Every: The Digital Photo Frame will turn on or off at the set time everyday.
Once: The Digital Photo Frame only turns on or off at the set time once.
4. Press the [OK] button to confirm.

Setting time

You can set the system time to the current date and time so that the Calendar display is correct.
1. Press the [SETUP] button. The Setup Menu appears on the screen.
2. Press the [ ] or [ ] button to select TIME.
3. Press the [ ] or [ ] button to highlight next or previous setting (year, month, day, hour, minutes). And press the [ ] or [ ] button to
adjust the time.
4. Press the [OK] button to confirm.

Setting alarm clock

The Digital Photo Frame can also work as an alarm.
1. Press the [SETUP] button. The Setup Menu appears on the screen.
2. Press the [ ] or [ ] button to select ALARM.
3. Press the [ ] or [ ] button to highlight next or previous setting (hour, minutes, ring, schedule). And press the [ ] or [ ] button to adjust
the time, select the ring or select the schedule as below.
Off: Disables the auto power on or off function.
Every: The Digital Photo Frame will turn on or off at the set time everyday.
Once: The Digital Photo Frame only turns on or off at the set time once.
4. Press the [OK] button to confirm.

Displaying Calendar

You can switch your Digital Photo Frame to Calendar mode that the current date and time is displayed on the screen with a slide show in
thumbnail.
1. Select the Calendar icon on the main screen and press the [OK] button.
The Calendar is displayed on the screen and all photos in the all memory source start
slide show in thumbnail.
2. To exit the Calendar mode, press the [ ] button.
Note:
The Digital Photo Frame will switch to Calendar mode automatically if it is non-usage
for 5 minutes (except for Pause mode).
The date and time can be adjusted in the SETUP mode.
10